We notice you are currently visiting the UK site. Would you like to visit our main site instead?

ASRock - Server Board ROME2D16HM3

configurator results memory

  • Standard

    0 MB (Removable)

  • Maximum

    1 TB LRDIMMs

    1 TB Reg ECC RDIMMs

  • CPU 1:

  • CPU 2:

  • Bus Architecture

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 16 Socket(s) using two CPUs

    8 Socket(s) per CPU

  • AMD EPYC 7002/7003 Series

Important Configuration Notes

  • Faster memory will clock down to run at optimal speed depending on processor model and number of modules installed.
  • Mixing x4 and x8 modules is allowed, however not within the same bank.
  • Kingston offers both Registered (RDIMM) and Load Reduced (LRDIMM) memory modules. Registered and Load Reduced modules CANNOT be mixed within the same system.
  • Please note specific board revision and/or BIOS/firmware upgrade maybe required to utilize the following parts that use 16Gbit technology:
  • KSMxxRD4/64xxx
  • KSMxxRS4/32xxx
  • KSMxxRD8/32xxx
  • KSMxxRS8/16xxx
  • Please refer to system documentation.

Compatible Upgrades For Your System

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).