We notice you are currently visiting the UK site. Would you like to visit our main site instead?

ASUS - P11C-I/NGFF2280 Motherboard

configurator results memory

  • Standard

    0 MB (Removable)

  • Maximum

    64 GB

  • Bus Architecture

    USB 2.0/3.x Type-A

    PCI Express

    SSD - SATA 2.5-inch 9.5mm

    SSD M.2 NVME 2280 (Heat Sink)

  • 2 Socket(s)

  • Intel Celeron 8th/9th Gen Intel C24x Series

    Intel Core i3 8th/9th Gen Intel C24x Series

    Intel Pentium 8th/9th Gen Intel C24x Series

    Intel Xeon E-2100/E-2200 Intel C24x Series

Important Configuration Notes

  • Only Intel Xeon E-x2xx Series processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
  • Faster memory will clock down to run at optimal speed depending on processor model installed.
  • MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
  • If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). Maximum configurations require a 64-bit operating system.
  • Per Intel definitions, Xeon E-2100 series (Coffee Lake) processors require ECC memory. Desktop Core i3 and Pentium series (Coffee Lake) processors can support ECC or non-ECC memory. Mixing ECC and non-ECC within the same system is not recommended.

Compatible Upgrades For Your System

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).