We notice you are currently visiting the UK site. Would you like to visit our main site instead?

ASRock - Server Board ROMED8QM-2T

configurator results memory

  • Standard

    0 MB (Removable)

  • Maximum

    512 GB Reg ECC RDIMMs

    2 TB LRDIMMs

  • Bus Architecture

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 7mm

    SSD - M.2 SATA

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 8 Socket(s)

  • AMD EPYC 7002/7003 Series

Important Configuration Notes

  • Faster memory will clock down to run at optimal speed depending on processor model and number of modules installed.
  • Mixing x4 and x8 modules is allowed, however not within the same bank.
  • Registered and Load Reduced modules CANNOT be mixed within the same system.
  • Please note specific board revision and/or BIOS/firmware upgrade maybe required to utilize the following parts that use 16Gbit technology:
  • KSMxxRD4/64xxx
  • KSMxxRS4/32xxx
  • KSMxxRD8/32xxx
  • KSMxxRS8/16xxx
  • Please refer to system documentation.

Compatible Upgrades For Your System

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).