Gigabyte - E133-X10 Server (MX14-BL1)
-
Bus Architecture
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
SSD M.2 NVME 2280 (double-sided)
SSD M.2 NVME 22110 (double-sided)
-
4 Socket(s)
-
Intel Pentium Intel C26x Series
Intel Xeon E-2400 Series Intel C26x Series
E133-X10
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
- Faster memory will clock down to run at optimal speed depending on processor model and number of modules installed. Refer to manual for supported memory configurations and speeds.
- This system supports ECC or non-ECC memory depending on which processor is installed. Mixing ECC and non-ECC modules is not recommended. Please refer to manual or CPU specifications for additional information.
Compatible Upgrades For Your System
- Server Premier
- Solid-state drives
Filter
Filters
Applied
-
Part Number: KSM48E40BD8KI-32HA
- Part Number: KSM48E40BD8KI-32HA
- DDR5 4800MT/s ECC Unbuffered DIMM CL40 2RX8 1.1V 288-pin 16Gbit Hynix A
- Spec Sheet PDF
- PCN
DDR5 4800MT/s ECC Unbuffered DIMM CL40 2RX8 1.1V 288-pin 16Gbit Hynix A
-
Part Number: KSM48E40BS8KI-16HA
- Part Number: KSM48E40BS8KI-16HA
- DDR5 4800MT/s ECC Unbuffered DIMM CL40 1RX8 1.1V 288-pin 16Gbit Hynix A
- Spec Sheet PDF
- PCN
DDR5 4800MT/s ECC Unbuffered DIMM CL40 1RX8 1.1V 288-pin 16Gbit Hynix A
Filter
Filters
Applied
-
Part Number: SEDC600ME/480G
- Part Number: SEDC600ME/480G
- Designed for data center environments
- On-board power loss protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s read, 470MB/s write
- Learn more
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 470MB/s write
- PCN
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.