MiTAC/Tyan - Transport VX50 (B4881)

-
Standard
0 MB (Removable)
-
Maximum
24 GB using DDR400 with 4 CPUs (6GB per CPU)
32 GB using DDR266/333 with 4 CPUs
48 GB using DDR400 with 8 CPUs (6GB per CPU)
64 GB using DDR266/333 with 8 CPUs
-
CPU 0
-
CPU 1
-
CPU 2
-
CPU 3
-
M4881 Riser Card
CPU0 -
CPU1 -
CPU2 -
CPU3
-
Bus Architecture
USB 2.0/3.x Type-A
PCI-X
SSD - SATA 3.5-inch
-
16 Socket(s) with M4881 CPU Riser card = 32 Total
4 Socket(s) per CPU
16 Socket(s) Total or
16 Socket(s) +
-
AMD Opteron AMD 8000 Series
B4881V50S4H-4P; B4881V50S4H-8P; B4881V50U4H-4P; B4881V50U4H-8P
Important Configuration Notes
- Only Opterons 246 and higher support DDR400 memory. Using DDR400, this system supports a maximum SIX ranks of memory per CPU. Six ranks is achieved with two Dual Rank DIMMs plus two Single Rank DIMMs.
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS. Kingston offers "K2" kit part numbers for Dual Channel mode.
- Mixing x4 and x8 modules is allowed, however not within the same bank. If featured, Chipkill technology is supported with x4 modules only.
- KVR266X72RC25L/xxx parts are the same as the non "L" except they are low profile.
- KRX3200K2/xx parts have a timing of 3-3-3 (AMD approved)
- KRX3200AK2/xx parts have a timing of 2.5-3-3
Compatible Upgrades For Your System
- Solid-state drives
Filter
Filters
Applied
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 470MB/s write
- PCN
- Learn more
-
Part Number: SEDC600ME/480G
- Part Number: SEDC600ME/480G
- Designed for data center environments
- On-board power loss protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s read, 470MB/s write
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.