Supermicro - SuperServer 6016GT-TF-FM105
-
Standard
0 GB (Removable)
-
Maximum
48 GB ECC UDIMMs
192 GB Reg ECC RDIMMs
-
CPU 1:
-
CPU 2:
-
Bus Architecture
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 3.5-inch
-
6 Socket(s) per CPU
12 Socket(s) using two CPUs
-
Intel Xeon 5600/5500 Series Intel 5520
SYS-6016GT-TF-FM105
Important Configuration Notes
- Faster memory will clock down to run at optimal speed and voltage depending on processor model and number of modules installed.
- Due to chipset limitations, Kingston's DDR3 Quad Rank memory will operate at 1066MHz in the first Triple Channel bank. Adding Quad Rank modules in the second Triple Channel bank will operate at 800MHz. The third memory bank if present must be unpopulated.
- Due to chipset limitations, Unbuffered ECC DIMMs are limited to TWO Triple Channel banks per processor on Intel Xeon 55xx series systems.
- Intel Xeon 5600 Series processors support 1.5V DDR3 and 1.35V low-voltage DDR3L memory. If 1.5V and 1.35V DIMMs are mixed, all DIMMs run at 1.5V. Xeon 5500 Series processors support only 1.5V memory.
- This system supports either Registered ECC or Unbuffered ECC memory. Mixing Registered ECC and Unbuffered ECC modules is not supported within this system.
Compatible Upgrades For Your System
- Solid-state drives
Filter
Filters
Applied
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- PCN
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.