Supermicro - X10SAE Motherboard
-
Bus Architecture
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
-
4 Socket(s)
-
Intel Core i3 4xxx Intel C200 Series
Intel Core i5 4xxx Intel C200 Series
Intel Core i7 4xxx Intel C200 Series
Intel Xeon E3-1200 v3 Series Intel C200 Series
MBD-X10SAE
Important Configuration Notes
- If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). A 64-bit Operating System is required to utilize more than 4GB of memory.
- This system supports both ECC and non-ECC memory. Mixing ECC and non-ECC modules is not recommended. Registered ECC memory not supported.
- Memory will run at optimal speed and voltage depending on processor model.
Compatible Upgrades For Your System
- ValueRAM
- Solid-state drives
Filter
Filters
Applied
-
Part Number: KVR16LN11/4
- Part Number: KVR16LN11/4
- DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 1RX8 1.35V 240-pin 4Gbit
- Spec Sheet PDF
DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 1RX8 1.35V 240-pin 4Gbit
-
Part Number: KVR16LN11/8
- Part Number: KVR16LN11/8
- DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.35V 240-pin 4Gbit
- Spec Sheet PDF
DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.35V 240-pin 4Gbit
-
Part Number: KVR16N11/8
- Part Number: KVR16N11/8
- DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.5V 240-pin 4Gbit
- Spec Sheet PDF
DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.5V 240-pin 4Gbit
Filter
Filters
Applied
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SKC600/256G
- Part Number: SKC600/256G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 500MB/s write
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.