HP/HPE - ProLiant XL190r Gen9 (G9)
-
Standard
8 GB (Removable)
-
Maximum
512 GB Reg ECC RDIMMs
1 TB LRDIMMs
-
8GB Standard:
Processor 1 (installed):
8 GB -
Processor 2 (optional):
-
Bus Architecture
Flash - microSDHC
SSD - SATA 2.5-inch 9.5mm
-
8 Socket(s) per CPU
16 Socket(s) using two CPUs
-
Intel Xeon E5-2600 v3/v4 Intel C610 Series
789917-B21
Important Configuration Notes
- Memory will clock down to run at optimal speeds depending on processor model and number of modules installed. See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- This system supports Registered ECC (RDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 8 DIMM slots are available. When populating with two processors 16 DIMM slots are available.
Compatible Upgrades For Your System
- System-specific memory
- Solid-state drives
Filter
Filters
Applied
-
Part Number: KTH-PL426/16G
- Part Number: KTH-PL426/16G
- DDR4 2666MT/s ECC Registered DIMM CL19 1RX4 1.2V 288-pin 8Gbit
DDR4 2666MT/s ECC Registered DIMM CL19 1RX4 1.2V 288-pin 8Gbit
-
Part Number: KTH-PL426/32G
- Part Number: KTH-PL426/32G
- DDR4 2666MT/s ECC Registered DIMM CL19 2RX4 1.2V 288-pin 8Gbit
DDR4 2666MT/s ECC Registered DIMM CL19 2RX4 1.2V 288-pin 8Gbit
-
Part Number: KTH-PL426S8/8G
- Part Number: KTH-PL426S8/8G
- DDR4 2666MT/s ECC Registered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
DDR4 2666MT/s ECC Registered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
Filter
Filters
Applied
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- PCN
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.