MSI - B150M PRO-VDH Motherboard
-
Bus Architecture
PCI
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
-
4 Socket(s)
-
Intel Celeron Intel B150
Intel Core i3 Intel B150
Intel Core i5 Intel B150
Intel Core i7 Intel B150
Intel Pentium Intel B150
Important Configuration Notes
- Faster memory will clock down to run at optimal speed depending on processor model installed. Intel® 7th Gen processors support DDR4-2400 and Intel® 6th Gen processors support DDR4-2133.
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode. Kingston offers "K2" kit part numbers for Dual Channel mode.
- If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). Maximum configurations require a 64-bit operating system.
Compatible Upgrades For Your System
- ValueRAM
- Solid-state drives
-
Part Number: KVR26N19D8/16
- Part Number: KVR26N19D8/16
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S6/4
- Part Number: KVR26N19S6/4
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX16 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX16 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S6L/4
- Part Number: KVR26N19S6L/4
- DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX16 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX16 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S8/8
- Part Number: KVR26N19S8/8
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S8L/8
- Part Number: KVR26N19S8L/8
- DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX8 1.2V 288-pin 8Gbit
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SKC600/256G
- Part Number: SKC600/256G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 500MB/s write
- Learn more
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- PCN
- Learn more
-
Part Number: SEDC600ME/960G
- Part Number: SEDC600ME/960G
- Designed for data center environments
- On-board power loss protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s read, 530MB/s write
- Learn more