Supermicro - X11SSi-LN4F Motherboard
-
Bus Architecture
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
SSD - M.2 (TBD)
-
4 Socket(s)
-
Intel Core i3 6th Gen Intel C236
Intel Xeon E3-1200 v5/v6 Intel C236
MBD-X11SSi-LN4F-B
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode. Kingston offers "K2" kit part numbers for Dual Channel mode.
- Faster memory will clock down to run at optimal speed depending on processor model installed.
- Depending on which processor you install, different memory modules can be utilized. Intel Xeon and some Intel Core I processors can use ECC or non-ECC UDIMMs. Other Intel Core i processors can only utilize non-ECC UDIMMs.
- If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). A 64-bit Operating System is required to utilize more than 4GB of memory.
Compatible Upgrades For Your System
- Server Premier
- Solid-state drives
Filter
Filters
Applied
-
Part Number: KSM26ED8/16HD
- Part Number: KSM26ED8/16HD
- DDR4 2666MT/s ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit Hynix D
- Spec Sheet PDF
- PCN
DDR4 2666MT/s ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit Hynix D
-
Part Number: KSM26ED8/16MR
- Part Number: KSM26ED8/16MR
- DDR4 2666MT/s ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit Micron R
- Spec Sheet PDF
- PCN
DDR4 2666MT/s ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit Micron R
-
Part Number: KSM26ES8/8HD
- Part Number: KSM26ES8/8HD
- DDR4 2666MT/s ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit Hynix D
- Spec Sheet PDF
- PCN
DDR4 2666MT/s ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit Hynix D
-
Part Number: KSM26ES8/8MR
- Part Number: KSM26ES8/8MR
- DDR4 2666MT/s ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit Micron R
- Spec Sheet PDF
- PCN
DDR4 2666MT/s ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit Micron R
Filter
Filters
Applied
-
Part Number: SA400S37/480G
- Part Number: SA400S37/480G
- SATA Rev 3.0
- 500MB/s read, 450MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- PCN
- Learn more
-
Part Number: SKC600/2048G
- Part Number: SKC600/2048G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 520MB/s write
- Learn more
-
Part Number: SEDC600ME/960G
- Part Number: SEDC600ME/960G
- Designed for data center environments
- On-board power loss protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s read, 530MB/s write
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.