HP/HPE - Synergy 480 Gen10 (G10) Compute Module
-
Standard
8 GB (Removable)
-
Maximum
1.5 TB Reg ECC RDIMMs
3 TB LRDIMMs
-
8GB Standard:
Processor 1 (installed):
8 GB -
Processor 2 (optional):
-
Bus Architecture
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 3.5-inch
-
12 Socket(s) per CPU
24 Socket(s) using two CPUs
-
Intel Xeon Scalable 1st/2nd Gen Intel C62x Series
871940-xxx; 871941-xxx; 871942-xxx; 871943-xxx; 871945-xxx; 871946-xxx
Important Configuration Notes
- Only Intel Xeon x2xx Series (Cascade Lake-SP) processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
- Memory will clock down to run at optimal speeds depending on processor model installed. See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- This system supports Registered ECC (RDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available. When populating with two processors 24 DIMM slots are available.
- White DIMM slots designate the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.
Compatible Upgrades For Your System
- System-specific memory
- Solid-state drives
-
Part Number: KTH-PL426S8/8G
- Part Number: KTH-PL426S8/8G
- DDR4 2666MT/s ECC Registered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
DDR4 2666MT/s ECC Registered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
-
Part Number: KTH-PL432S8/8G
- Part Number: KTH-PL432S8/8G
- DDR4 3200MT/s ECC Registered DIMM CL22 1RX8 1.2V 288-pin 8Gbit
DDR4 3200MT/s ECC Registered DIMM CL22 1RX8 1.2V 288-pin 8Gbit
-
Part Number: KTH-PL426/16G
- Part Number: KTH-PL426/16G
- DDR4 2666MT/s ECC Registered DIMM CL19 1RX4 1.2V 288-pin 8Gbit
DDR4 2666MT/s ECC Registered DIMM CL19 1RX4 1.2V 288-pin 8Gbit
-
Part Number: KTH-PL426D8/16G
- Part Number: KTH-PL426D8/16G
- DDR4 2666MT/s ECC Registered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
DDR4 2666MT/s ECC Registered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
-
Part Number: KTH-PL432/16G
- Part Number: KTH-PL432/16G
- DDR4 3200MT/s ECC Registered DIMM CL22 1RX4 1.2V 288-pin 8Gbit
DDR4 3200MT/s ECC Registered DIMM CL22 1RX4 1.2V 288-pin 8Gbit
-
Part Number: KTH-PL432D8P/16G
- Part Number: KTH-PL432D8P/16G
- DDR4 3200MT/s ECC Registered DIMM CL22 2RX8 1.2V 288-pin 8Gbit
DDR4 3200MT/s ECC Registered DIMM CL22 2RX8 1.2V 288-pin 8Gbit
-
Part Number: KTH-PL426/32G
- Part Number: KTH-PL426/32G
- DDR4 2666MT/s ECC Registered DIMM CL19 2RX4 1.2V 288-pin 8Gbit
DDR4 2666MT/s ECC Registered DIMM CL19 2RX4 1.2V 288-pin 8Gbit
-
Part Number: KTH-PL432/32G
- Part Number: KTH-PL432/32G
- DDR4 3200MT/s ECC Registered DIMM CL22 2RX4 1.2V 288-pin 8Gbit
DDR4 3200MT/s ECC Registered DIMM CL22 2RX4 1.2V 288-pin 8Gbit
-
Part Number: KTH-PL432/64G
- Part Number: KTH-PL432/64G
- DDR4 3200MT/s ECC Registered DIMM CL22 2RX4 1.2V 288-pin 16Gbit
DDR4 3200MT/s ECC Registered DIMM CL22 2RX4 1.2V 288-pin 16Gbit
-
Part Number: KTH-PL432LQ/128G
- Part Number: KTH-PL432LQ/128G
- DDR4 3200MT/s ECC Load Reduced DIMM CL22 4RX4 1.2V 288-pin 32GbitDDP
DDR4 3200MT/s ECC Load Reduced DIMM CL22 4RX4 1.2V 288-pin 32GbitDDP
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 470MB/s write
- PCN
- Learn more
-
Part Number: SEDC600ME/480G
- Part Number: SEDC600ME/480G
- Designed for data center environments
- On-board power loss protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s read, 470MB/s write
- Learn more
