We notice you are currently visiting the UK site. Would you like to visit our main site instead?

Yes, please

Supermicro - X11SPM-TPF Motherboard

configurator results memory

  • Standard

    0 GB (Removable)

  • Maximum

    1.5 TB ECC LRDIMM(384GB w/current Kingston products)

    1.5 TB ECC RDIMMs(384GB w/current Kingston products)

Compatible Memory Upgrades

  • Bus Architecture

    USB 2.0/3.x Type-A

    PCI Express

    SSD - SATA 2.5-inch 9.5mm

    SSD - M.2 PCIe

Compatible Storage Upgrades

  • 6 Socket(s)

  • Intel Xeon Intel C62x Series

MBD-X11SPM-TPF

Important Configuration Notes

  • Faster memory will clock down to run at optimal speed depending on processor model installed.
  • Only Intel Xeon x2xx Series (Cascade Lake-SP) processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
  • Registered RDIMM and Load Reduced LRDIMM memory modules CANNOT be mixed within the same system.
  • Mixing x4 and x8 modules is allowed, however not within the same bank.

Compatible Upgrades For Your System

Results
Speed{{Footnote.A65242}}
DIMM Type
Module Capacity
Ranking
DRAM Width
DRAM Density
Filter Filters Applied

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).

Results
Capacity Range
Form factor
Interface
Filter Filters Applied
* Kits: warranty void and returns not accepted if sold or used separately.