We notice you are currently visiting the UK site. Would you like to visit our main site instead?

Supermicro - X11SRA-RF Motherboard

configurator results memory

  • Standard

    0 GB (Removable)

  • Maximum

    512 GB ECC LRDIMMs

    512 GB ECC RDIMMs

  • Bus Architecture

    USB 2.0/3.x Type-A

    PCI Express

    SSD - SATA 2.5-inch 9.5mm

    SSD - M.2 PCIe

  • 8 Socket(s)

  • Intel Xeon Intel C42x Series

MBD-X11SRA-RF

  • ECC RDIMMs:

    Configurations up to 256GB can be reached using any combination of Kingston's 8, 16, and 32GB modules IN GROUPS OF SIX.

  • LRDIMMs:

    Configurations up to 512GB can be reached using Kingston's 64GB modules IN GROUPS OF SIX.

Important Configuration Notes

  • Only Intel Xeon x2xx Series (Cascade Lake-SP) processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
  • Faster memory will clock down to run at optimal speed depending on processor model installed.
  • Registered RDIMM and Load Reduced LRDIMM memory modules CANNOT be mixed within the same system.
  • Mixing x4 and x8 modules is allowed, however not within the same bank.

Compatible Upgrades For Your System

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).