We notice you are currently visiting the UK site. Would you like to visit our main site instead?

Yes, please

Tyan Computers - Tempest HX S7105

configurator results memory

  • Standard

    0 MB (Removable)

  • Maximum

    384 GB Reg ECC RDIMMs

    768 GB LRDIMMs

Compatible Memory Upgrades

  • CPU 1:

  • CPU 2:

  • Bus Architecture

    USB 2.0/3.x Type-A

    PCI Express

    SSD - SATA 2.5-inch 9.5mm

    SSD - M.2 SATA

    SSD - M.2 NVMe

Compatible Storage Upgrades

  • 6 Socket(s) per CPU

    12 Socket(s) using two CPUs

  • Intel Xeon Intel C62x Series

S7105AGM2NR-2T

Important Configuration Notes

  • Only Intel Xeon x2xx Series (Cascade Lake-SP) processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
  • Faster memory will clock down to run at optimal speeds depending on processor model installed.
  • Kingston offers both Registered (RDIMM) and Load Reduced (LRDIMM) memory modules. Registered and Load Reduced modules CANNOT be mixed within the same system.

Compatible Upgrades For Your System

Results
Speed{{Footnote.A65242}}
DIMM Type
Module Capacity
Ranking
DRAM Width
DRAM Density
Filter Filters Applied

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).

Results
Capacity Range
Form factor
Interface
Filter Filters Applied
* Kits: warranty void and returns not accepted if sold or used separately.