Epson - Endeavor Pro9000
-
Standard
4 GB (Removable)
-
Maximum
128 GB when using i7-9800X (Skylake)
256 GB when using i9-109xxx (Cascade Lake)
-
Bus Architecture
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 3.5-inch
SSD M.2 NVME 2280 (double-sided)
-
4 Socket(s)
-
Intel Core i7 9800X Intel X299
Intel Core i9 10900/10920X/10980XE Intel X299
Important Configuration Notes
- Cascade Lake-X processors are required to use memory modules built with 16Gbit density DRAM. BIOS/firmware updates and/or specific board revisions may also be required. Skylake-X processors can only use 8Gbit density DRAM and can NOT use KCP429ND8/32 or KCP429NS8/16.
- MODULES MUST BE ORDERED AND INSTALLED IN FOURS for Quad Channel mode.
- Faster memory will clock down to run at optimal speed depending on processor model and number of modules installed.
Compatible Upgrades For Your System
- System-specific memory
- Solid-state drives
Filter
Filters
Applied
-
Part Number: KCP432ND8/16
- Part Number: KCP432ND8/16
- DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 2RX8 1.2V 288-pin 8Gbit
DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 2RX8 1.2V 288-pin 8Gbit
-
Part Number: KCP432ND8/32
- Part Number: KCP432ND8/32
- DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 2RX8 1.2V 288-pin 16Gbit
DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 2RX8 1.2V 288-pin 16Gbit
-
Part Number: KCP432NS8/16
- Part Number: KCP432NS8/16
- DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX8 1.2V 288-pin 16Gbit
DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX8 1.2V 288-pin 16Gbit
Filter
Filters
Applied
-
Part Number: SFYRS/500G
- Part Number: SFYRS/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-Sided
- Learn more
-
Part Number: SFYRD/2000G
- Part Number: SFYRD/2000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 7,000MB/s write
- Includes Acronis cloning software
- Double-sided
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SKC600/256G
- Part Number: SKC600/256G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 500MB/s write
- Learn more
-
Part Number: SKC3000S/512G
- Part Number: SKC3000S/512G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 3,900MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- PCN
- Learn more
-
Part Number: SKC3000D/4096G
- Part Number: SKC3000D/4096G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 7,000MB/s Write
- Includes Acronis cloning software
- Double-sided
- Learn more
-
Part Number: SEDC600ME/960G
- Part Number: SEDC600ME/960G
- Designed for data center environments
- On-board power loss protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s read, 530MB/s write
- Learn more
Buy From
* Kits: warranty void and returns not accepted if sold or used separately.