We notice you are currently visiting the UK site. Would you like to visit our main site instead?

Yes, please

Gigabyte - B660M DS3H DDR4 Motherboard

configurator results memory

  • Standard

    0 GB (Removable)

  • Maximum

    128 GB

Compatible Memory Upgrades

  • Bus Architecture

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    PCIe 4.0

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

Compatible Storage Upgrades

  • 4 Socket(s)

  • Intel Core i3 12th Gen Intel B660

    Intel Core i5 12th Gen Intel B660

    Intel Core i7 12th Gen Intel B660

    Intel Core i9 12th Gen Intel B660

Important Configuration Notes

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). Maximum configurations require a 64-bit operating system.

Kingston FURY Configuration Notes

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.

Compatible Upgrades For Your System

Overclocking pushes the stable industry standard specifications of memory (speed, latencies, voltage) to achieve higher performance. While generally safe and supported by Intel, AMD and the motherboard/system manufacturers, overclocking is done at your own risk. System stability may be compromised by some speeds and configurations. The FURY parts listed are based on motherboard manufacturer testing (QVLs) and Kingston internal testing. However, some systems may require premium components (high-end processor models, motherboards, power supplies and water cooling) to achieve stable overclocking, particularly at extreme speeds.

Results
Speed{{Footnote.A65242}}
Total (kit) Capacity
Module Capacity
Ranking
DRAM Density
Voltage
Kit
Filter Filters Applied
Results
Total (kit) Capacity
Module Capacity
Ranking
DRAM Width
DRAM Density
Filter Filters Applied

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).

Results
Capacity Range
Form factor
Interface
Filter Filters Applied
* Kits: warranty void and returns not accepted if sold or used separately.