Supermicro - X13SAZ-Q Motherboard
-
Bus Architecture
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
USB 2.0/3.x Type-C
SSD M.2 NVME 22110 (double-sided)
SSD M.2 NVME 2280 (Heat Sink)
-
4 Socket(s)
-
Intel Core i3 12th Gen Intel Q670
Intel Core i5 12th Gen Intel Q670
Intel Core i7 12th Gen Intel Q670
Intel Core i9 12th Gen Intel Q670
MBD-X13SAZ-Q
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
- Memory will clock down to run at optimal speed depending on processor model and number of modules installed.
Compatible Upgrades For Your System
- ValueRAM
- Solid-state drives
-
Part Number: KVR48U40BD8-32
- Part Number: KVR48U40BD8-32
- DDR5 4800MT/s Non-ECC Unbuffered DIMM CL40 2RX8 1.1V 288-pin 16Gbit
- Spec Sheet PDF
DDR5 4800MT/s Non-ECC Unbuffered DIMM CL40 2RX8 1.1V 288-pin 16Gbit
-
Part Number: KVR48U40BS8-16
- Part Number: KVR48U40BS8-16
- DDR5 4800MT/s Non-ECC Unbuffered DIMM CL40 1RX8 1.1V 288-pin 16Gbit
- Spec Sheet PDF
DDR5 4800MT/s Non-ECC Unbuffered DIMM CL40 1RX8 1.1V 288-pin 16Gbit
Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support. Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).
-
Part Number: SFYRS/500G
- Part Number: SFYRS/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-Sided
- Learn more
-
Part Number: SFYRSK/1000G
- Part Number: SFYRSK/1000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 6,000MB/s write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SFYRD/2000G
- Part Number: SFYRD/2000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 7,000MB/s write
- Includes Acronis cloning software
- Double-sided
- Learn more
-
Part Number: SFYRDK/2000G
- Part Number: SFYRDK/2000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 7,000MB/s write
- Includes Acronis cloning software
- Double-sided
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SKC600/256G
- Part Number: SKC600/256G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 500MB/s write
- Learn more
-
Part Number: SNV3S/500G
- Part Number: SNV3S/500G
- Gen 4x4 NVMe PCIe performance
- Three-year limited warranty
- Includes Acronis cloning software
- Up to 5,000MB/s read, 3,000MB/s write
- Learn more
-
Part Number: SKC3000S/512G
- Part Number: SKC3000S/512G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 3,900MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- PCN
- Learn more
-
Part Number: SKC3000D/4096G
- Part Number: SKC3000D/4096G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 7,000MB/s Write
- Includes Acronis cloning software
- Double-sided
- Learn more