Biostar - X670E VALKYRIE Motherboard
-
Bus Architecture
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
USB 2.0/3.x Type-C
SSD M.2 NVME 2260 (double-sided)
SSD M.2 NVME 22110 (double-sided)
SSD M.2 NVME 2280 (Heat Sink)
-
4 Socket(s)
-
AMD Ryzen 3 7000 Series AMD X670
AMD Ryzen 5 7000 Series AMD X670
AMD Ryzen 7 7000 Series AMD X670
AMD Ryzen 9 7000 Series AMD X670
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
- Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds. In configurations of 2DPC (2 DIMMs per Channel, 4 total DIMMs installed), standard JEDEC spec (ValueRAM) memory (non-EXPO) may clock down.
Kingston FURY Configuration Notes
- Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
- Check with your motherboard QVL for the latest tested memory parts and supported configurations.
- If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
Compatible Upgrades For Your System
- ValueRAM
- Solid-state drives
-
Part Number: KVR48U40BS6-8
- Part Number: KVR48U40BS6-8
- DDR5 4800MT/s Non-ECC Unbuffered DIMM CL40 1RX16 1.1V 288-pin 16Gbit
- Spec Sheet PDF
DDR5 4800MT/s Non-ECC Unbuffered DIMM CL40 1RX16 1.1V 288-pin 16Gbit
-
Part Number: KVR52U42BD8-32
- Part Number: KVR52U42BD8-32
- DDR5 5200MT/s Non-ECC Unbuffered DIMM CL42 2RX8 1.1V 288-pin 16Gbit
- Spec Sheet PDF
DDR5 5200MT/s Non-ECC Unbuffered DIMM CL42 2RX8 1.1V 288-pin 16Gbit
Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support. Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).
-
Part Number: SFYRS/500G
- Part Number: SFYRS/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-Sided
- Learn more
-
Part Number: SFYRSK/500G
- Part Number: SFYRSK/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SFYRD/2000G
- Part Number: SFYRD/2000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 7,000MB/s write
- Includes Acronis cloning software
- Double-sided
- Learn more
-
Part Number: SFYRDK/2000G
- Part Number: SFYRDK/2000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 7,000MB/s write
- Includes Acronis cloning software
- Double-sided
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SKC600/256G
- Part Number: SKC600/256G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 500MB/s write
- Learn more
-
Part Number: SNV3S/500G
- Part Number: SNV3S/500G
- Gen 4x4 NVMe PCIe performance
- Three-year limited warranty
- Includes Acronis cloning software
- Up to 5,000MB/s read, 3,000MB/s write
- Learn more
-
Part Number: SKC3000S/512G
- Part Number: SKC3000S/512G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 3,900MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- PCN
- Learn more
-
Part Number: SEDC600ME/960G
- Part Number: SEDC600ME/960G
- Designed for data center environments
- On-board power loss protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s read, 530MB/s write
- Learn more
-
Part Number: SKC3000D/4096G
- Part Number: SKC3000D/4096G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 7,000MB/s Write
- Includes Acronis cloning software
- Double-sided
- Learn more