We notice you are currently visiting the UK site. Would you like to visit our main site instead?

MSI - PRO B660M-A CEC WIFI DDR4 V2 Motherboard

configurator results memory

  • Standard

    0 GB (Removable)

  • Maximum

    128 GB

  • Bus Architecture

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2280 (Heat Sink)

  • 4 Socket(s)

  • Intel Core i3 12th/13th Gen Intel B660

    Intel Core i5 12th/13th Gen Intel B660

    Intel Core i7 12th/13th Gen Intel B660

    Intel Core i9 12th/13th Gen Intel B660

Important Configuration Notes

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds.

Kingston FURY Configuration Notes

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations. Per MSI, overclocking is limited by the Ranks and number of DIMMs installed per channel.
  • 1DPC 1R Max speed up to 5200+ MT/s
  • 1DPC 2R Max speed up to 4800+ MT/s
  • 2DPC 1R Max speed up to 4400+ MT/s
  • 2DPC 2R Max speed up to 4000+ MT/s

Compatible Upgrades For Your System

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).