Gigabyte - BRIX GB-BER5H-7535
-
Standard
4 GB (Removable)
8 GB (Removable)
-
Maximum
64 GB
-
4GB Standard:
4 GB -
8GB Standard:
4 GB4 GB
-
Bus Architecture
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 7mm
USB 2.0/3.x Type-C
SSD - M.2 SATA
SSD M.2 NVME 2280 (double-sided)
-
2 Socket(s)
-
AMD Ryzen 5 7535U
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
- Faster memory will clock down to run at optimal speed depending on processor model and number of modules installed. Refer to manual for supported memory configurations and speeds.
Compatible Upgrades For Your System
- ValueRAM
- Solid-state drives
Filter
Filters
Applied
-
Part Number: KVR48S40BS6-8
- Part Number: KVR48S40BS6-8
- DDR5 4800MT/s Non-ECC Unbuffered SODIMM CL40 1RX16 1.1V 262-pin 16Gbit
- Spec Sheet PDF
DDR5 4800MT/s Non-ECC Unbuffered SODIMM CL40 1RX16 1.1V 262-pin 16Gbit
Filter
Filters
Applied
-
Part Number: SFYRS/500G
- Part Number: SFYRS/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-Sided
- Learn more
-
Part Number: SFYRD/2000G
- Part Number: SFYRD/2000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 7,000MB/s write
- Includes Acronis cloning software
- Double-sided
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SKC3000S/512G
- Part Number: SKC3000S/512G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 3,900MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SKC600/512G
- Part Number: SKC600/512G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 520MB/s write
- Learn more
-
Part Number: SEDC600ME/480G
- Part Number: SEDC600ME/480G
- Designed for data center environments
- On-board power loss protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s read, 470MB/s write
- Learn more
-
Part Number: SKC3000D/4096G
- Part Number: SKC3000D/4096G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 7,000MB/s Write
- Includes Acronis cloning software
- Double-sided
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.