MSI - MAG Infinite S3 13th / (RTX 40 series) (DDR5)
-
Bus Architecture
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 3.5-inch
USB 2.0/3.x Type-C
SSD M.2 NVME 2280 (double-sided)
-
2 Socket(s)
-
Intel Core i7 13700
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
- Memory will operate at optimal speed depending on the number and types of modules installed. Refer to motherboard manual and QVL for supported memory configurations and speeds.
- Per MSI, DDR5-4800 is only supported with 1R DIMMs at JEDEC spec (ValueRAM) at 4800MT/s. 2R DIMMs may clock down.
Compatible Upgrades For Your System
- ValueRAM
- Solid-state drives
Filter
Filters
Applied
-
Part Number: KVR48U40BS6-8
- Part Number: KVR48U40BS6-8
- DDR5 4800MT/s Non-ECC Unbuffered DIMM CL40 1RX16 1.1V 288-pin 16Gbit
- Spec Sheet PDF
DDR5 4800MT/s Non-ECC Unbuffered DIMM CL40 1RX16 1.1V 288-pin 16Gbit
Filter
Filters
Applied
-
Part Number: SFYRS/500G
- Part Number: SFYRS/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-Sided
- Learn more
-
Part Number: SFYRD/2000G
- Part Number: SFYRD/2000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 7,000MB/s write
- Includes Acronis cloning software
- Double-sided
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SKC600/256G
- Part Number: SKC600/256G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 500MB/s write
- Learn more
-
Part Number: SKC3000S/512G
- Part Number: SKC3000S/512G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 3,900MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- PCN
- Learn more
-
Part Number: SEDC600ME/960G
- Part Number: SEDC600ME/960G
- Designed for data center environments
- On-board power loss protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s read, 530MB/s write
- Learn more
-
Part Number: SKC3000D/4096G
- Part Number: SKC3000D/4096G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 7,000MB/s Write
- Includes Acronis cloning software
- Double-sided
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.