We notice you are currently visiting the UK site. Would you like to visit our main site instead?

Yes, please

ASRock - B760M-CX Motherboard

configurator results memory

  • Standard

    0 GB (Removable)

  • Maximum

    192 GB (w/current Kingston 48GB DIMMs)

Compatible Memory Upgrades

  • Bus Architecture

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

Compatible Storage Upgrades

  • 4 Socket(s)

  • Intel Core i3 12th/13th/14th Gen Intel B760

    Intel Core i5 12th/13th/14th Gen Intel B760

    Intel Core i7 12th/13th/14th Gen Intel B760

    Intel Core i9 12th/13th/14th Gen Intel B760

Important Configuration Notes

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit density DRAM.
  • Industry standard "ValueRAM" DIMMs are built to JEDEC specifications and will operate at the standard speed allowed by the processor. Based on processor rules for module ranks and configurations they will safely clock down to lower speeds. Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • 1PDC (1 DIMM per Channel)
  • 2DPC (2 DIMMs per Channel)
  • 1R (Single Rank)
  • 2R (Dual rank)
  • Per Intel, 14th Gen processors support the following standard speeds by rank and configuration:
  • 1DPC 1R Up to 5600MT/s
  • 1DPC 2R Up to 5600MT/s
  • 2DPC 1R Up to 4000MT/s
  • 2DPC 2R Up to 3600MT/s
  • Per Intel, 13th Gen processors support the following standard speeds by rank and configuration:
  • 1DPC 1R Up to 5600MT/s
  • 1DPC 2R Up to 5200MT/s
  • 2DPC 1R Up to 4000MT/s
  • 2DPC 2R Up to 3600MT/s

Kingston FURY Configuration Notes

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • Performance may increase with BIOS updates.
  • Kingston FURY Beast parts with AMD EXPO profiles also feature Intel XMP profiles for cross-platform compatibility.
  • Kingston FURY Beast and Renegade with Intel XMP profiles only feature Intel XMP profiles and require a BIOS that supports these to work on AMD chipsets.
  • This motherboard supports memory featuring both AMD EXPO and Intel XMP profiles. The Kingston FURY options listed have been verified compatible by the motherboard manufacturer.

Compatible Upgrades For Your System

Results
Speed{{Footnote.A65242}}
Total (kit) Capacity
Module Capacity
Ranking
DRAM Width
DRAM Density
Filter Filters Applied

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).

Results
Capacity Range
Form factor
Interface
Filter Filters Applied
* Kits: warranty void and returns not accepted if sold or used separately.