MSI - B760 GAMING PLUS WIFI DDR4 Motherboard
-
Bus Architecture
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
USB 2.0/3.x Type-C
PCIe 4.0
SSD M.2 NVME 2242 (double-sided)
SSD M.2 NVME 2260 (double-sided)
SSD M.2 NVME 22110 (double-sided)
SSD M.2 NVME 2280 (Heat Sink)
-
4 Socket(s)
-
Intel Core i3 12th/13th/14th Gen Intel B760
Intel Core i5 12th/13th/14th Gen Intel B760
Intel Core i7 12th/13th/14th Gen Intel B760
Intel Core i9 12th/13th/14th Gen Intel B760
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
- Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds.
- If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). Maximum configurations require a 64-bit operating system.
Kingston FURY Configuration Notes
- FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
- Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
- Check with your motherboard QVL for the latest tested memory parts and supported configurations.
- If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
- A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
- Performance may increase with BIOS updates.
- Kingston FURY Beast parts with AMD EXPO profiles also feature Intel XMP profiles for cross-platform compatibility.
- Kingston FURY Beast and Renegade with Intel XMP profiles only feature Intel XMP profiles and require a BIOS that supports these to work on AMD chipsets.
- This motherboard supports memory featuring both AMD EXPO and Intel XMP profiles. The Kingston FURY options listed have been verified compatible by the motherboard manufacturer.
Compatible Upgrades For Your System
- ValueRAM
- Solid-state drives
-
Part Number: KVR32N22D8/16
- Part Number: KVR32N22D8/16
- DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 2RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 2RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR32N22D8/32
- Part Number: KVR32N22D8/32
- DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 2RX8 1.2V 288-pin 16Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 2RX8 1.2V 288-pin 16Gbit
-
Part Number: KVR32N22S6/4
- Part Number: KVR32N22S6/4
- DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX16 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX16 1.2V 288-pin 8Gbit
-
Part Number: KVR32N22S6/8
- Part Number: KVR32N22S6/8
- DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX16 1.2V 288-pin 16Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX16 1.2V 288-pin 16Gbit
-
Part Number: KVR32N22S8/16
- Part Number: KVR32N22S8/16
- DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX8 1.2V 288-pin 16Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX8 1.2V 288-pin 16Gbit
-
Part Number: KVR32N22S8/8
- Part Number: KVR32N22S8/8
- DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX8 1.2V 288-pin 8Gbit
Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support. Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).
-
Part Number: SFYRS/500G
- Part Number: SFYRS/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-Sided
- Learn more
-
Part Number: SFYRSK/500G
- Part Number: SFYRSK/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SFYRD/2000G
- Part Number: SFYRD/2000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 7,000MB/s write
- Includes Acronis cloning software
- Double-sided
- Learn more
-
Part Number: SFYRDK/2000G
- Part Number: SFYRDK/2000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 7,000MB/s write
- Includes Acronis cloning software
- Double-sided
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SKC600/256G
- Part Number: SKC600/256G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 500MB/s write
- Learn more
-
Part Number: SNV3S/500G
- Part Number: SNV3S/500G
- Gen 4x4 NVMe PCIe performance
- Three-year limited warranty
- Includes Acronis cloning software
- Up to 5,000MB/s read, 3,000MB/s write
- Learn more
-
Part Number: SKC3000S/512G
- Part Number: SKC3000S/512G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 3,900MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- PCN
- Learn more
-
Part Number: SKC3000D/4096G
- Part Number: SKC3000D/4096G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 7,000MB/s Write
- Includes Acronis cloning software
- Double-sided
- Learn more