Gigabyte - X299 AORUS Ultra Gaming Pro Motherboard
-
Standard
0 GB (Removable)
-
Maximum
64 GB when using Kabylake-X processor models
128 GB when using Skylake-X processor models
256 GB when using Cascade Lake-X processor models
-
Quad Channel
using Skylake-X/Cascade Lake-X processors
-
Dual Channel
using Kabylake-X processor models
-
Bus Architecture
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
USB 2.0/3.x Type-C
SSD - M.2 SATA
SSD - M.2 NVMe
SSD - M.2 PCIe
-
8 Socket(s) using Skylake-X/Cascade Lake-X processors
4 Socket(s) using Kabylake-X processors
-
Intel Core i5 X-series Intel X299
Intel Core i7 X-series Intel X299
Intel Core i9 X-series Intel X299
Intel Core i9 Extreme Edition X-series Intel X299
Important Configuration Notes
- Cascade Lake-X processors are required to use memory modules built with 16Gbit density DRAM. BIOS/firmware updates and/or specific board revisions may also be required. All other CPUs please contact the manufacturer.
- QUAD CHANNEL memory bandwidth is only supported on Intel Skylake-X and Cascade Lake-X processors. MODULES MUST BE ORDERED AND INSTALLED IN FOURS for Quad Channel mode.
- DUAL CHANNEL memory bandwidth is supported on Intel Kabylake-X processors. MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
- Per Gigabyte, when using Kabylake-X based processors, Dual Channel operation is limited to sockets A1+B1, A2+B2. Refer to manual for proper installation.
Compatible Upgrades For Your System
- ValueRAM
- Solid-state drives
-
Part Number: KVR26N19D8/16
- Part Number: KVR26N19D8/16
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S8/8
- Part Number: KVR26N19S8/8
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S8L/8
- Part Number: KVR26N19S8L/8
- DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX8 1.2V 288-pin 8Gbit
Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support. Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).
-
Part Number: SFYRS/500G
- Part Number: SFYRS/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-Sided
- Learn more
-
Part Number: SFYRSK/500G
- Part Number: SFYRSK/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SFYRDK/4000G
- Part Number: SFYRDK/4000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 7,000MB/s write
- Includes Acronis cloning software
- Double-sided
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SNV3S/500G
- Part Number: SNV3S/500G
- Gen 4x4 NVMe PCIe performance
- Three-year limited warranty
- Includes Acronis cloning software
- Up to 5,000MB/s read, 3,000MB/s write
- Learn more
-
Part Number: SKC3000S/512G
- Part Number: SKC3000S/512G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 3,900MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SKC600/512G
- Part Number: SKC600/512G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 520MB/s write
- Learn more
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- PCN
- Learn more
-
Part Number: SEDC600ME/960G
- Part Number: SEDC600ME/960G
- Designed for data center environments
- On-board power loss protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s read, 530MB/s write
- Learn more