HP/HPE - 14 Series Notebook 14g-cr0xxx (Core i)
-
Standard
4 GB (Removable)
8 GB (Removable)
-
Maximum
16 GB
-
4GB Standard:
4 GB -
8GB Standard:
8 GB
-
Bus Architecture
USB 2.0/3.x Type-A
Flash - SDXC
SSD - SATA 2.5-inch 7mm
SSD - M.2 SATA
SSD - M.2 NVMe
-
2 Socket(s)
-
Intel Core i3 7020U/8130U
Intel Core i5 8250U
Intel Core i7 8550U
Important Configuration Notes
MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode. Faster memory will clock down to run at optimal speed depending on processor model.
Compatible Upgrades For Your System
- System-specific memory
- Solid-state drives
Filter
Filters
Applied
-
Part Number: KCP426SS6/4
- Part Number: KCP426SS6/4
- DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX16 1.2V 260-pin 8Gbit
DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX16 1.2V 260-pin 8Gbit
-
Part Number: KCP432SS6/4
- Part Number: KCP432SS6/4
- DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX16 1.2V 260-pin 8Gbit
DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX16 1.2V 260-pin 8Gbit
-
Part Number: KCP432SS8/8
- Part Number: KCP432SS8/8
- DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX8 1.2V 260-pin 8Gbit
DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX8 1.2V 260-pin 8Gbit
Filter
Filters
Applied
-
Part Number: SFYRS/500G
- Part Number: SFYRS/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-Sided
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SKC600/256G
- Part Number: SKC600/256G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 500MB/s write
- Learn more
-
Part Number: SNV3S/500G
- Part Number: SNV3S/500G
- Gen 4x4 NVMe PCIe performance
- Three-year limited warranty
- Includes Acronis cloning software
- Up to 5,000MB/s read, 3,000MB/s write
- Learn more
-
Part Number: SKC3000S/512G
- Part Number: SKC3000S/512G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 3,900MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SEDC600ME/1920G
- Part Number: SEDC600ME/1920G
- Designed for data center environments
- On-board power loss protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s read, 530MB/s write
- Learn more
Buy From
* Kits: warranty void and returns not accepted if sold or used separately.