ASRock - 970A-G/3.1 Motherboard
-
Standard
0 GB (Removable)
-
Maximum
32 GB with current Kingston products
64 GB with future 16GB module
-
Bus Architecture
PCI
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
SSD - M.2 PCIe
-
4 Socket(s)
-
AMD Phenom II X6 (AM3) AMD 970
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode. Kingston offers "K2" kit part numbers for Dual Channel mode.
- If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). A 64-bit Operating System is required to utilize more than 4GB of memory.
- 1600MHz memory speed is supported depend on AM3/AM3+ CPU installed.
Compatible Upgrades For Your System
- ValueRAM
- Solid-state drives
Filter
Filters
Applied
-
Part Number: KVR16LN11/4
- Part Number: KVR16LN11/4
- DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 1RX8 1.35V 240-pin 4Gbit
- Spec Sheet PDF
DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 1RX8 1.35V 240-pin 4Gbit
-
Part Number: KVR16N11/8
- Part Number: KVR16N11/8
- DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.5V 240-pin 4Gbit
- Spec Sheet PDF
DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.5V 240-pin 4Gbit
Filter
Filters
Applied
-
Part Number: SFYRS/500G
- Part Number: SFYRS/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-Sided
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SKC600/256G
- Part Number: SKC600/256G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 500MB/s write
- Learn more
-
Part Number: SNV3S/500G
- Part Number: SNV3S/500G
- Gen 4x4 NVMe PCIe performance
- Three-year limited warranty
- Includes Acronis cloning software
- Up to 5,000MB/s read, 3,000MB/s write
- Learn more
-
Part Number: SKC3000S/512G
- Part Number: SKC3000S/512G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 3,900MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- PCN
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.