HP/HPE - 15 Series Notebook 15-da1xxx (Intel Core processors)
-
Standard
8 GB (Removable)
12 GB (Removable)
-
Maximum
16 GB
-
8GB Standard:
8 GB -
12GB Sandard:
8 GB4 GB
-
Bus Architecture
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
Flash - SDXC
SSD - SATA 2.5-inch 7mm
SSD - M.2 SATA
SSD - M.2 NVMe
-
2 Socket(s)
-
Intel Core i3 7020U/8130U/8145U
Intel Core i5 8250U/8265U
Intel Core i7 7500U/8550U/8565U
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
- Faster memory will clock down to run at optimal speed depending on processor model installed.
Compatible Upgrades For Your System
- System-specific memory
- Solid-state drives
Filter
Filters
Applied
-
Part Number: KCP426SS6/4
- Part Number: KCP426SS6/4
- DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX16 1.2V 260-pin 8Gbit
DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX16 1.2V 260-pin 8Gbit
-
Part Number: KCP432SS6/4
- Part Number: KCP432SS6/4
- DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX16 1.2V 260-pin 8Gbit
DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX16 1.2V 260-pin 8Gbit
-
Part Number: KCP432SS8/8
- Part Number: KCP432SS8/8
- DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX8 1.2V 260-pin 8Gbit
DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX8 1.2V 260-pin 8Gbit
Filter
Filters
Applied
-
Part Number: SFYRS/500G
- Part Number: SFYRS/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-Sided
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SNV3S/500G
- Part Number: SNV3S/500G
- Gen 4x4 NVMe PCIe performance
- Three-year limited warranty
- Includes Acronis cloning software
- Up to 5,000MB/s read, 3,000MB/s write
- Learn more
-
Part Number: SKC3000S/512G
- Part Number: SKC3000S/512G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 3,900MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SKC600/512G
- Part Number: SKC600/512G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 520MB/s write
- Learn more
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- PCN
- Learn more
-
Part Number: SEDC600ME/960G
- Part Number: SEDC600ME/960G
- Designed for data center environments
- On-board power loss protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s read, 530MB/s write
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.