Question 1

Where can I find the latest update for my DT4000G2 encrypted USB drive?

Accepted Answer

Select the link below to download the latest update for the DT4000G2 encrypted USB drive.
This update provides compatibility for macOS Big Sur.

Note: Please read the included updater instructions in its entirety prior to running the update.

Native macOS Update (macOS User): https://media.kingston.com/support/downloads/DT4000G2_Mac_Updater.zip

Question 2

When I insert my drive and the security software is launched, I do not get a password prompt.
The drive does work under administrator.
How do I resolve this?

Accepted Answer

We've seen this happen when security software blocks the user's ability to write to CDs/DVDs. Run gpedit.msc and go to Windows Settings>Security Settings>Local Policies>Security Options and make sure Devices: Restrict CD-ROM access to locally logged-on user only is set to disabled.

Also, too many entries for mounted devices in older computers can cause this problem. When all the entries cleared the drive should work again. To do this, go to start and type regedit in the search field. Make sure to back up your registry before making any changes. Here are instructions for backing up your registry.

http://windows.microsoft.com/en-GB/windows-vista/Back-up-the-registry

In the directory list on the left side, find the entry HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices. Remove all entries except for default (it won't let you anyway).

You can also look at Device Manager when the Data Traveler is connected to see if the drive comes up with any yellow exclamation marks. Uninstalling the device with the exclamation mark and scanning for new hardware sometimes will work as well. You may want to try this even if you do not see any yellow exclamation marks for this device. You will need to run the uninstall as the Admin to be able to perform this while logged-in as a non-Admin.

Also check the setting for your security programs (Norton, Symantec, etc).

Question 3

Can I use my DataTraveler as a bootable USB device?

Accepted Answer

Although it is possible to boot from the DataTraveler, it is not a feature Kingston supports.These drives are intended as storage devices.

Question 4

Can this secure USB flash drive be formatted to work as a standard USB drive or the security be disabled to remove the password requirement?

Accepted Answer

This drive is designed to be 100% encrypted. The security is built into the drive and cannot be removed or disabled.

Question 5

Why is the available storage capacity of my product slightly less than the advertised capacity?

Accepted Answer

This is common for flash storage, whether internal SSD or external USB storage. It is due in part to a variance in how flash memory vs spinning platter hard drive manufacturers calculate megabyte. Hard drive manufacturers calculate a megabyte (or 1,000x1,000 bytes) as 1,000KBs, whereas the binary calculation for flash-based storage is 1,024KBs.

Example: For a 1TB flash-based storage device, Windows will calculate it as having a capacity of 931.32GB. (1,000,000,000,000÷1,024÷1,024÷1,024=931.32GB).

Furthermore, Kingston reserves some of the listed capacity for formatting and other functions, such as firmware and/or controller-specific information, and thus some of the listed capacity is not available for data storage.

Question 6

My DataTraveler will not accept a 4GB or larger file. Why?

Accepted Answer

To transfer files larger than 4GB, the DataTraveler must have an NTFS or exFAT file system. Unfortunately, the FAT32 file system is not capable of handling a single file larger than 4GB (to be exact, one byte less than 4GB). Follow the steps below to format the DataTraveler with an NTFS File system:

Warning, all data on the DataTraveler will be lost! Please back up the data on the DataTraveler before proceeding.

Type This PC in the Windows search bar. Right-click on the Kingston drive and select Format.
Select NTFS or exFAT from the file system drop-down list.
Select Quick Format as the Format option and click Start.

Note: macOS X has read-only access for drives formatted with NTFS file system. Additionally, some multi-media devices may not support NTFS.

Question 7

I formatted my DataTraveler that is 32GB or larger using NTFS and I want to format it back to FAT32. How do I do this?

Accepted Answer

As Windows is unable to format a drive over 32GB with FAT32, the use of third-party software is required. Although we cannot assist in acquiring or using third-party software to format a drive as FAT32, there are a number of free applications that can be found via Google or Bing search.

FAQ: KDT-010611-GEN-14

Was this helpful?

Question 8

Why does my USB Flash Drive and/or USB Reader get hot/warm to the touch?

Accepted Answer

In most cases, it is normal for an external USB device to get warm or hot to the touch since the exterior shell helps cool the internal components by emitting heat into the air.

Some of the factors of a USB external device getting warm or hot:

Material: Metal flash drives and readers tend to get warmer while in use than other types of USB flash devices. This is simply because metal absorbs heat much more easily than materials like plastic do.
Environmental Temperature: If the host device or surrounding temperature is high, the drive's cooling capability decreases. USB drives often become warmer when used in hot environments or with warm devices.
File Transfers: Transferring large files or a high volume of files can raise the drive's temperature. Large files take longer to transfer, requiring more energy, thus generating more heat. Quick consecutive file transfers have the same effect as transferring large files, increasing the drive's temperature. During data transfer, the drive heats up internally and releases heat through its casing.

Note: None of the above listed factors impact the functionality of the USB device.

After the data transfer is complete, wait 30-60 seconds before removing the USB device from the host machine. This should provide enough time for the temperature of the USB device to cool.

Question 9

KTD-DT4000-ELCAP After updating to Mac OS X 10.11 (El Capitan), I get the error "Unable to start the DTXX application..." or "ERR_COULD_NOT_START". How do I resolve this?

Accepted Answer

The changes that Apple made in Mac OS 10.11 disabled the functionality of our secure USB drives. We recommend that you update your Kingston secure USB drive by downloading and installing one of the updates provided on the following page.

Update for Mac OS 10.11 support

If you have a custom secure USB drive, please contact your IT department.

If you have a DT4000M or DT4000M-R drive, please contact technical support.

Question 10

If I forgot my password or the drive no longer accepts my password. Can the data on the drive be recovered?

Accepted Answer

By default, after the predefined max number of unsuccessful password attempts is reached, the drive will format and all data will be lost. Once the format is complete, data recovery is not possible. However, if you have not exhausted the max number of unsuccessful password attempts, you may consider contacting a professional data recovery company for assistance, such as DriveSavers Inc.
Please note: Kingston does not retain master passwords for encrypted USB drives.

Question 11

After upgrading to Windows 10, I cannot log in to my secure USB drive. The password Windows appears briefly and then disappears. How can I resolve this?

Accepted Answer

The problem may occur because the update has deleted your user Temp folder. The drive uses this when running the security software.

To access the location of this folder, you must first un-hide all files and folders. To un-hide the files and folders, right-click on the Start button and select File Explorer, click on File at the top then on Change Folder and Search Options. Click on the View tab and select Show Hidden Files and Folders.

Once un-hidden, go to the C: drive>Users>Username (where username should be your name)>App Data. If there is no file called Temp, create a new folder and name it Temp. Once this is done, try your drive again.

Question 12

When I insert this  DataTraveler into my Windows computer, I receive an error stating  &amp;quot;(DataTraveler) requires two free drive letters&amp;quot; or  &amp;quot;(DataTraveler) could not start&amp;quot;. Why?

Accepted Answer

This DataTraveler requires two consecutive drive letters AFTER the last physical disk that appears before the 'gap' in drive letter assignments (see figure below). This does NOT pertain to network shares because they are specific to user profiles and not the system hardware profile itself, and thus appear available to the OS.

This means that Windows may assign the DataTraveler a drive letter that's already in use by a network share or Universal Naming Convention (UNC) path, causing a drive letter conflict. If this happens, please consult your administrator or help desk department for information on changing drive letter assignments in Windows Disk Management (administrator privileges required.)

In this example, the DataTraveler uses drive F:, which is the first available drive letter after drive E: (the last physical disk before the drive letter gap). Since letter G: is a network share and not part of the hardware profile, the DataTraveler may attempt to use it as its second drive letter, causing a conflict.

If there are no networkshares on your system and the DataTraveler still won’t load, it is possiblethat a card reader, removable disk, or other previously-installed device isholding on to a drive-letter assignment and still causing a conflict.

Please note that DriveLetter Management, or DLM, has improved significantly in Windows XP SP3, Vistaand 7, so you may not come across this issue, but if you are unable to resolvethe conflict, please contact Kingston’s Technical Support Department forfurther assistance.

DataTraveler 4000 G2 - Support

Resources

Frequently Asked Questions

Still Need Assistance?

Email Customer Service

Chat With Support