現在、英国のサイトにアクセスしていることに気づきました。代わりにメインサイトにアクセスしますか?

support category card readers
USB 3.0 High-Speed Media Reader (FCR-HS4)

USB 3.0 High-Speed Media Reader - サポート

よく寄せられる質問

This reader does support SDXC cards. Be aware that most SDXC cards will use the exFAT file system. Most devices that accept SDXC cards, like digital cameras, read this file system. Therefore you should make sure the operating system on your computer will support exFAT or can be updated to support exFAT.

FAQ: KFR-072611-HS3-01

上記の内容はお役に立ちましたか?

Windows assigns new drive letters to the next available physical drive. It will sometimes take the same drive letter as a network drive for this reason. This is a common problem with removable storage devices. Please use the following procedure to resolve this problem.

  1. With the reader plugged into a USB port, type Computer Management in the Windows Search bar and press Enter.
  2. Select Disk Management on the left window pane.
  3. Locate the reader on the right window pane.
  4. Right-click on the drive and select “Change Drive Letter and Paths” and assign it a new drive letter that is not being used by a mapped network drive.
  5. Go back to “Computer” and open it to see if the reader is assigned the drive letter you chose.

FAQ: KFR-011411-GEN-01

上記の内容はお役に立ちましたか?

これはUSBの電力制限に起因します。USBデバイスの中には、これらUSBポートでも問題なく動作するものもありますが、USB 2.0対応の高速デバイスの場合、より多くの電力を必要とします。この問題を解決するには、メインUSBポートにリーダーを接続するようにしてください。通常メインUSBポートは、タワー背面に位置しています。 ノートパソコン用のシステムの場合、ノートパソコンの左右両側にあるすべてのUSBポートで試してください。これでもリーダーが認識されない場合、テクニカルサポートまでお問い合わせください。 

FAQ: KFR-011411-GEN-02

上記の内容はお役に立ちましたか?

FCR-HS3 は新デザインをベースにしているため、19-in-1 アイコンユーティリティとは互換性がなく、もし使用した場合は FCR-HS3 が正しく機能しなくなります。FCR-HS3 リーダーを使用する前に、19-1 アイコンユーティリティをアンインストールする必要があります。

FAQ: KFR-090111-HS3-03

上記の内容はお役に立ちましたか?

This reader does support SDXC cards. Be aware that most SDXC cards will use the exFAT file system. Most devices that accept SDXC cards, like digital cameras, read this file system. Therefore you should make sure the operating system on your computer will support exFAT or can be updated to support exFAT.

FAQ: KFR-072611-HS3-01

上記の内容はお役に立ちましたか?

FCR-HS3 は新デザインをベースにしているため、19-in-1 アイコンユーティリティとは互換性がなく、もし使用した場合は FCR-HS3 が正しく機能しなくなります。FCR-HS3 リーダーを使用する前に、19-1 アイコンユーティリティをアンインストールする必要があります。

FAQ: KFR-090111-HS3-03

上記の内容はお役に立ちましたか?

Windows assigns new drive letters to the next available physical drive. It will sometimes take the same drive letter as a network drive for this reason. This is a common problem with removable storage devices. Please use the following procedure to resolve this problem.

  1. With the reader plugged into a USB port, type Computer Management in the Windows Search bar and press Enter.
  2. Select Disk Management on the left window pane.
  3. Locate the reader on the right window pane.
  4. Right-click on the drive and select “Change Drive Letter and Paths” and assign it a new drive letter that is not being used by a mapped network drive.
  5. Go back to “Computer” and open it to see if the reader is assigned the drive letter you chose.

FAQ: KFR-011411-GEN-01

上記の内容はお役に立ちましたか?

これはUSBの電力制限に起因します。USBデバイスの中には、これらUSBポートでも問題なく動作するものもありますが、USB 2.0対応の高速デバイスの場合、より多くの電力を必要とします。この問題を解決するには、メインUSBポートにリーダーを接続するようにしてください。通常メインUSBポートは、タワー背面に位置しています。 ノートパソコン用のシステムの場合、ノートパソコンの左右両側にあるすべてのUSBポートで試してください。これでもリーダーが認識されない場合、テクニカルサポートまでお問い合わせください。 

FAQ: KFR-011411-GEN-02

上記の内容はお役に立ちましたか?

Still Need Assistance?

Chat With Support

チャットを始める
情報をお届けします!Kingston ニュースなど、弊社からのメール情報をご登録ください。