USB 3.0 High-Speed Media Reader - 技术支持

This reader does support SDXC cards. Be aware that most SDXC cards will use the exFAT file system. Most devices that accept SDXC cards, like digital cameras, read this file system. Therefore you should make sure the operating system on your computer will support exFAT or can be updated to support exFAT.

FAQ: KFR-072611-HS3-01

Windows assigns new drive letters to the next available physical drive. It will sometimes take the same drive letter as a network drive for this reason. This is a common problem with removable storage devices. Please use the following procedure to resolve this problem.

1. With the reader plugged into a USB port, type Computer Management in the Windows Search bar and press Enter.
2. Select Disk Management on the left window pane.
3. Locate the reader on the right window pane.
4. Right-click on the drive and select “Change Drive Letter and Paths” and assign it a new drive letter that is not being used by a mapped network drive.
5. Go back to “Computer” and open it to see if the reader is assigned the drive letter you chose.

FAQ: KFR-011411-GEN-01

这是由于功率限制的原因。 尽管一些 USB 设备也许能够在这些 USB 端口中正常工作，但是 USB 2.0 高速设备通常需要更高的功率。 为了解决这个问题，您需要将读卡器直接插入其中一个主 USB 端口。 这些 USB 端口通常位于台式机的背部。 如果是笔记本系统，请尝试笔记本左右两侧的每个 USB 端口。如果读卡器仍未识别，请联系技术支持求助。 

FAQ: KFR-011411-GEN-02

由于 FCR-HS3 基于全新设计，19 合 1 图标工具不兼容，且可能造成 FCR-HS3 不正常工作。 您应该在使用 FCR-HS3 读卡器之前卸载 19 合 1 图标工具。

FAQ: KFR-090111-HS3-03